Category: On the Home Front

They got a lot more accomplished on day 3 than I expected. When Danyel and I spoke in the morning we discussed only the hallways, master bedroom and the TV room. As it was, the hallways, master bedroom, back room, guest room, gym and about 1/3 of Michelle’s office was floored by the time they left.

I’m certainly no expert but, from my perspective, it looks like the work is being done with due professionalism and care. Each step from the pulling of the carpet to the prep through to the laying of the wood has flowed with no obvious problems or issues.

The adhesive being used is not nearly so bad as I had expected. I’m working from home through this whole process and there is plastic separating the “under construction” part of the house from the rest. But the adhesive smell is reminiscent of being back in grade school at those little desks working with LePages glue-all (that white glue that is ubiquitous in classrooms throughout North America).

I do keep my windows open, and have been leaving the back door open so the cats can “escape” from the noise and activity as needed. Maverick just melts into the background and appears only now and then for no reason that I can think of. Phoebe is constantly on patrol. Whenever there is a loud noise she trots *toward* it in a guarded fashion. She always wants to be part of the action.

So here is what things look like now:

Crumb!  I just realized that I had totally messed up my focus on the “before” pictures and now it’s too late to retake them. 🙁  I’ve been pretty tired lately with this renovation prep and didn’t even notice when I was viewing the pics online on a real screen!! Sorry! Hopefully the pictures can still convey the essence of what I’m describing.

Day 1

At the start of Day 1 all of our stuff was piled up in the living room and garage

The morning had the carpeting being pulled out and then the underlying slab assessed. This is where the additional $1,100 prep came from when we found that the slab bore more resemblance to a Six Flags roller coaster than it does to something one might term as “flat”.

So, after agreements were made the crew was able to start the prep work which involved a LOT of leveling cement.

Day 2

It was found that the cement was largely too wet to proceed Danyel (I think that’s how you spell his name), the team leader was using this slick device to measure the moisture content in all of the floors. Ideally the moisture needs to be below 4 (percent I believe) and ideally below 2. Many of the patches on the floor were pegging the meter. It went to 6.

So they did some cleanup of the thinner patched portions and did a bunch of grinding but were out of here by about 11 am. I needed leave the furnace on much higher than usual for the rest of the day and overnight to encourage the cement to dry.

One thing I hadn’t thought of was that you really need to disable or remove your smoke detectors before the grinding begins. Ditto for when they start cutting wood later. There is a LOT of fine dust that is generated.

Two days prior to the first day of work on the new Hardwood floors we began moving stuff out of the carpeted rooms.

The evening of the day before (this was a Monday so we were at work during the day) we finished most everything else and were ready. Here is what the rooms looked like:

Just before we moved into our home about 12 years ago, the sellers replaced all the flooring (except in the laundry room) with new carpeting. Some of it was replaced with tile when we renovated our Living area back in 2002.

Now, of our 2,500 square foot house, we are replacing about 1,500 square feet of carpeting with hardwood flooring. We got a couple of estimates and decided to go with Enhance Floor Trends located not too far from us here in Marietta.

We went with an engineered wood flooring that would be most suitable to gluing straight down on concrete. One of the estimates we received tried to have us use cork on our concrete slab to “improve the feel” of the flooring when you walked on it. I was unable to find any corroboration for that claim (most references to cork cited soundproofing as the reason to use this) so I became concerned that there was significant upselling going on which helped make the decision to go with Enhance easier.

We got a reasonable deal on the flooring itself as we chose one that is going out of production. So, in return for a limited warranty (and I dislike warranties anyway) we got the wood for 1/3 off the price.

So, for 1560 square feet:
– Bruce rockhampton Plank / Natural (3/8″ x 3″) installed (w/freight and tax) $8.85 / sq ft
$14230.44

– 1/3 off
($5,865.60)

– 2 T-Moldings (prefinished)
$98.00

– Shoemolding (primed)
$825.00

– Pull and dispose Carpet / Pad / Tackstrip
$350.00

– Move basic furniture (we did most of the moving ourselves but some pieces were too big) (Master Bed, Armoire, Desk)
$75.00

– Anticipated floor Prep (moderate) There was a range for additional cost should the floor be really bad.
$575.00

There was also a 5% job discount available to us
($489.12)

Total was to be $9,798.72

Once the carpet had been pulled they were able to assess the floor. Our slab has all the flatness of a roller coaster. It turned out that the additional cost for the slab was to be about $1,100.00. Yech, but not surprising once you see the associated pictures.

So, actual total will be more like $12,000.00