Marc's Musings

Once I set up my cable modem I decided to put my Vonage router between my modem and my WRT54G wireless router. This is how Vonage’s website indicates it should be done, but not how their techs will have you set it up if you call for assistance. For some reason I had loads of trouble trying to set it up properly when using my DSL account. I think I was just trying to overthink the whole thing.

Anyway, a few tweaks to the Quality of Service parms (QOS) on the Vonage router and my voice communication is as solid as it gets. I had also previously installed the Alchemy firmware update on my WRT54G box to ensure decent QOS when Vonage was on the “wrong” side of it from the Cable box (Cable Box – WRT54G – Vonage Router). It was a good step since the Alchemy firmware update is eminently configurable. And it brought me some immediate relief when I started working with Bittorrent. You see one of my podcast feeds (SlashDotReview) has had some hosting issues due to bandwidth consumption and has moved its main feed over to a Bittorrent feed.

Anyway, I am able to give priority to voice traffic (and HTTP traffic) and lower the priority for Bittorrent traffic and that helped a lot. But the best solution was to swap the order of the boxes (Cable Box – Vonage Router – WRT54G) and let the Vonage router have full control over QOS.

Then I disconnected Bellsouth at the point where it enters the house and have plugged my Vonage router into a wall socket. End result? All phones in the house are now driven off of the Vonage router.

Now to cancel my BellSouth service. I also have to deal with the fact that my TIVO (Series 2 Phillips DSR704) can’t dial out on the Vonage line. What’s good enough for voice definitely isn’t good enough for the picky modem chipset in these boxes. I’m toying with alternatives, but that’s another discussion.

Even though my phone lines have always been run through my surge protector. For some reason I had not run my incoming cable wire through the surge protector as well. I just left it as the technician installed it.

Yes, it’s now surge protected too.

Yes I had a technician install my cable – it required fishing a line down my kitchen wall from my very hot, very dry, very dusty attic. Well worth the $37 I paid to Comcast. I’ve fished enough lines up there that I know the value I’m getting by letting someone else do it! 🙂

Took him nearly two hours to fish that line…

In my efforts to embrace all that is wonderful and new I’ve been steadily preparing to wean myself off of Bellsouth. I set myself up with Vonage a couple of months ago and that went pretty well. Just this past Saturday I had Comcast come by and set me up with a cable Internet connection. I have to say it’s blazing! I used to get about 2200 kbits/second download speed with my Bellsouth MegaDSL line my Comcast hovers consistently in the high 3,000’s and I’ve even seen it get above 4,000. And that extra speed is noticeable when I stream videos and the like.

Anyway, about 29 hours after initiating my Comcast service, tropical storm Arlene made itself felt in the form of a power surge that resulted in a great white flash and cool “popping” noise that demolished my cable modem.

After some going around with the cable company (mostly because their outlets are not open on Mondays and then they are not supposed to do modem swaps) I managed to get a replacement modem a couple of days later and was back in business.

Then I found that the surge had also taken out my Vonage router :(. About 45 minutes on the phone with India and then New Jersey resulted in them agreeing that the router was toast and they are shipping me a replacement.

I expect the replacement to arrive tomorrow then I’ll be back in business.

I just retired my venerable StarTac phone in favor of the VI-125 from LG after 5 years of use.Who is LG? No idea, but this phone had several features that I really liked so I went with it. Unfortunately Sprint PCS does not offer Motorola phones any longer. Motorola seemed to be the only folks out there who understood the concept of a "Vibrate then Ring" setting.

The new phone does sport a vibrate mode and is intelligent enough to switch to a ring tone when in the charger. Mich’s Samsung phone (SCH-A460) doesn’t do that for some weird reason. It seems like whoever designed hers doesn’t actually use a cell phone.

I also wanted to get rid of the antenna since that turned out to be the biggest weakness in my wonderful StarTac. It kept getting caught on things and eventually the "catching" caused the case to crack. It isn’t completely shattered yet, but it was about to go and I didn’t want to be "Phoneless". I recognize that the internal antenna is likely to not be as sensitive as an external, but I’m pretty sure that this new technology phone’s newer electronics should allow it to be on par with my last phone with the antenna.

I also wanted a speaker phone. Not for public places, but when I’m at my desk at home or in my car I’d much prefer to be talking to the phone at a distance rather than holding it up to my ear. One of the odd things that I’m noticing with a lot of new phones now is that you cannot hear yourself in the earpiece as you talk. Maybe that partly explains why folks seem to sound so loud when they use them?

And, most importantly, the phone is just a phone. I was a little concerned that I was going to end up with all sorts of other junk on the phone (camera being the most obvious add-in). Don’t get me wrong. I’m no Luddite, but the camera quality on cell phones is so poor that I’m not remotely interested. When they sport 3-6 Megapixel CCDs and decent optics I’ll look into combining my phone and camera (at least I’ll always have the camera). But I just upgraded from an older digital camera because the pictures really don’t look good anymore on today’s computers and I see no reason to go backwards just to have the camera on my phone.